Grid Tie Inverter is wind turbines inverter in a wind generator power, it plays a crucial role. Grid Tie Inverter operating procedure will be as follows:
1. The grid tie inverter to pass through connects the solar panels and the wind turbine dc power supply cable terminal in the inverter dc input; make sure that the polarity is correct. Grid Tie Inverter dc input cable size for optimum output is 30AWG or cable, are equipped for more data. Grid Tie Inverter optimal length lower than 8 meters, cable will carry higher voltage. Grid Tie Inverter power creation of the scope or screen wind generator to 300KW power rating is Jason koumiss.
2, Grid Tie Inverter will exchange output voltage first turn on the inverter to the correct position (220V or 380V), in line with the power grid ac or dc voltage an alternative and different.
3, Grid Tie Inverter connection affords the ac power cables and plugs, this needs an inverter electrical power.
4, Grid Tie Inverter under normal conditions, the operation speed of wind bicycle is produced as outlined by how much electricity wind generator to ascertain its speed. Grid Tie Inverter no exchange network detection, if grid tie inverter is not going to extinguish red led generated power; this is actually the so-called island protection.
Grid Tie Inverter is really a small power inverter, installation can be quite convenient and reliable. Grid Tie Inverter through its lattice tie output cable, you cannot find any additional equipment.
No comments:
Post a Comment