FAQ about RO Water Filter (II)

Continue to the paper FAQ about water filter (I), the question about the RO water filter will be given in the following.
Why does the water comes from the RO water filter can not meet the daily supply?
Following are the possible reasons.
1. Check the RO water filter, whether the calculation is wrong.
2. Check the pump pressure is in the RO water filter’s proper pressure (0.6Mpa).
3. Check the flush valve whether it is closed lax.
4. Check the water temperature; ensure the RO water filter temperature is not too low.
There is no strong concentration of water from the pipes, the RO water filter’s pure water and tap water TDS values are the same, why?
Possible reasons: this situation may appear in the products just installed, demolition of a wider range to the RO water filter as the new installation. The wrong RO water filter membrane will be high-pressure pump, shell membrane between the water directly to the carbon of the three links at the rear, so that high-pressure pump out the RO water filter, directly into the storage bucket.
There are more questions would be list in the FAQ about RO water filter (III).
The copyright of this article belongs to hisupplier. Please quote this as reference upon reproduction of this article.