Here are four processes of installing electric marine winches for a ships.
1. Set a electric marine winches in the place where you plan to attach it to the deck. Use the base of a electric marine winches as the template for a holes. Push a the prc marker through the openings and mark the deck where you can drill a mounting bolts.
2. Make sure that a space below a planned location for the electric marine winches is a void (an empty space, or the storage that doesn??￥t contain anything that might be a problem, just like the fuel tank) and that the mounting openings will not penetrate necessary ship systems. Drill one hole?§Cthe volume of the mounting bolts?§Cin the deck per mounting bolt. Drill an additional hole for the power cord. Use the bolts, washers and nuts that come with a electric marine winches to bolt a winch to a deck.
3. Push a electric marine winches?? power cord down through the remaining hole in the deck. Go below decks, to the place where a power cord penetrates a deck from above and connect the red wire of the power cord to the boat??￥s usual power buss. Connect a black ground wire of a electric marine winch to your boat??￥s typical ground.
4. a fourth step for installing a electric marine winches is to apply caulk around a heads of the mounting bolts and into a hole where a power lead penetrates a deck, with a caulk gun. The caulking should close the gaps fully, to reduce water from entering a boat through these openings.
The copyright of this article belongs to hisupplier. Please quote that as reference upon reproduction of that article.
No comments:
Post a Comment