Deep well pump is a kind of system used in sprinkler system and drainage is critical of farmland as well as water provide and drainage of factories and towns. So here are safe operation technique regulations with deep well pump for you to use that conveniently as well as safely.
1. Deep well pump need to used in method to obtain clean water when the sand volume is lowed than 0.01%. There has to be pre-moistening water water tank in pump motor house.
2. Towards deep well pump which is newly assembled and also after serious repair, your interval in between pump seed covering and impeller should be adjusted.
3. Until the working of deep well pump, it should be pre-moistened.
4. Prior to start the particular deep well pump, the implemented requirements ought to be fitted. (Your) Bolt associated with footing groundwork has been set. (B) Conclude play accords the necessities and the test nut with adjustable bolt has been assembled. (C) Supplying gland has now screwed and also through lubricating. (Debbie) Motor bearing has already lubricated.
5. The first and next level impellers associated with deep well pump should immerse 1 meter under water level. During the operation, do see the change connected with water level.
6. Throughout the operation, if you ever found a few bigger round the basic, check the having of deep well pump and padding places. If the abrade is just too big much, make sure you replace with brand-new components.
7. For the deep well pump which has absorbed or wiped out mud, you should clean it by using water ahead of stop push.
8. Before avoid pump, do close the opening valve, cut off the power, shut the switch-box. In the winter months, there will need to no drinking water in send before quit.
Do as the above factors, so that the deep well pump can be used a long time.
No comments:
Post a Comment