Installation of Brass Ball Valve to Pipe

Brass ball valves are made of copper and zinc alloys. Brass is the form of materials usually used to create a valves, pipes and connection tubes, radiators. Brass ball valve is evolved from cock. Ball valve uses ball with circular hole as open-close component, through turning ball with stem to do a job of opening and shutting.
Brass ball valves are extensively applied in a pipes to cut off, distribute, and change the direction of the fluid. Brass ball valve with V-shaped openings designs has excellent regulation characteristic. If you prefer to usage the brass ball valve, a first thing is to start its installation.

1. Pipe threaded ends need to be connected with the pipe threaded valve. A internal ?§Cthread are able to be a cylinder or a circular shape. But a external thread must be the cylinder type.
2. The female thread brass ball valve joints with the end of a pipes. It??￥s necessary to handle the length of a male thread in a end of the pipes, avoiding deformation of a valve. In case distortion occurs to the brass ball valve, a sealing performance might be bad.
3. It needs to usage a wrench to tighten the pipe thread valve in a hexagonal or octagonal parts, not a other side of a brass ball valve. Wrong installation may also cause distortion of the valve.
4. The flange valve planned to be connected should never only be in consistent with the required size of the pipe flange, however as well with a nominal pressure.

The copyright of this article belongs to hisupplier. Please quote this as guide upon copy of that article.