FAQ related to RO Water Filter (II)

Continue to a paper FAQ on water filter (I), the question related to the RO water filter can be given in the following.
Why does a water comes from a RO water filter could not meet a daily supply?
Following are a possible reasons.
1. Check the RO water filter, regardless of whether a calculation is wrong.
2. Check the pump pressure is in the RO water filter??￥s proper pressure (0.6Mpa).
3. Check a flush valve whether it is closed lax.
4. Check the water temperature; make sure the RO water filter temperature is not too low.
There is no strong concentration of water from a pipes, the RO water filter??￥s pure water and tap water TDS values are the same, why?
Possible reasons: it situation may appear in a products just installed, demolition of a wider range to a RO water filter as a unique installation. A wrong RO water filter membrane may be high-pressure pump, shell membrane between the water instantly to a carbon of the three links at the rear, and so that high-pressure pump out the RO water filter, directly into a storage bucket.
There are more things would be list in a FAQ related to RO water filter (III).
The copyright of this article belongs to hisupplier. Please quote this as reference upon reproduction of it article.